Compressed air temperature and humidity regulator with 230Vac/8A relays
Humidistat, thermostat with two relay outputs. T+RH probe from hard anodized duralumin for compressed air up to 25 bars with 1 meter cable. Outdoor, indoor use.
Relative humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.
-
codeH3061P
-
Warranty3 years
- $990
Technical data
Measured value
Temperature
Relative humidity
TEMPERATURE SENSOR
Measuring range
-30 to +105 °C
Accuracy
±0.4 °C
Resolution
0.1 °C
HUMIDITY SENSOR
Measuring range
0 to 100 % RH
Accuracy
±2.5 % RH from 5 to 95 % at 23 °C
Resolution
0.1% RH
DEW POINT
Measuring range
-60 to +80 °C
Accuracy
±1.5 °C at ambient temperature T <25 °C and RH >30 %
Resolution
0.1 °C
MEASURING THE MOISTURE OF COMPRESSED AIR
Measuring range
up to 25 bars
Air flow velocity
up to 25 m/s at a pressure of 1 bar (1m/s at a pressure of 25 bar)
RELAY OUTPUTS
Quantity
2
Maximal voltage
250 VAC
Maximal current
8 A
Maximal power
2000 VA AC, 192 W DC
GENERAL TECHNICAL DATA
Operating temperature
-30 to +80 °C
Channels
1x connectable temperature+humidity probe
Counted values
dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Acoustic alarm
from built-in beeper - switchable
Power
110-240 VAC
Protection class
IP65 electronics; IP40 sensors
Dimensions
136 x 161 x 45 mm; length/diameter of external probe 88/18 mm
External probe cable length
1 meter
Weight
approx. 490 g
Warranty
3 years